API tools faq
paste
Advertisement
robathome

Klipper configs

robathome
Mar 11th, 2019
186
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 2.63 KB | None | 0 0
raw download clone embed print report
  1. # Config file for Creality Ender-3
  2. # Rob Smith 9-Mar-2019
  3.  
  4. [stepper_x]
  5. step_pin: ar54
  6. dir_pin: ar55
  7. enable_pin: !ar38
  8. step_distance: 0.05
  9. endstop_pin: ^!ar3
  10. position_endstop: 0
  11. position_min: 0
  12. position_max: 220
  13. homing_speed: 50
  14. homing_retract_dist: 5
  15. second_homing_speed: 10
  16.  
  17. [tmc2208 stepper_x]
  18. uart_pin: ar63
  19. microsteps: 4
  20. interpolate: True
  21. run_current: 0.8
  22. hold_current: 0.3
  23. stealthchop_threshold: 9999
  24.  
  25. [stepper_y]
  26. step_pin: ar60
  27. dir_pin: !ar61
  28. enable_pin: !ar56
  29. step_distance: .05
  30. endstop_pin: ^!ar15
  31. position_endstop: 200
  32. position_min: 0
  33. position_max: 200
  34. homing_speed: 50
  35. homing_retract_dist: 5
  36. second_homing_speed: 10
  37.  
  38. [tmc2208 stepper_y]
  39. uart_pin: ar40
  40. microsteps: 4
  41. run_current: 0.8
  42. hold_current: 0.3
  43. stealthchop_threshold: 9999
  44.  
  45. [stepper_z]
  46. step_pin: ar46
  47. dir_pin: ar48
  48. enable_pin: !ar62
  49. step_distance: .01
  50. endstop_pin: ^!ar19
  51. position_endstop: 0.25
  52. position_min: -1
  53. position_max: 225
  54. homing_speed: 10
  55. homing_retract_dist: 3
  56. second_homing_speed: 3
  57.  
  58. [tmc2208 stepper_z]
  59. uart_pin: ar65
  60. microsteps: 4
  61. run_current: 0.8
  62. hold_current: 0.3
  63. stealthchop_threshold: 300
  64.  
  65. [extruder]
  66. step_pin: ar26
  67. dir_pin: !ar28
  68. enable_pin: !ar24
  69. step_distance: 0.041376
  70. nozzle_diameter: 0.3
  71. filament_diameter: 1.67
  72. max_extrude_cross_section: 10
  73. pressure_advance: 0.1
  74. pressure_advance_lookahead_time: 0.012
  75. heater_pin: ar10
  76. sensor_type: ATC Semitec 104GT-2
  77. sensor_pin: analog13
  78. control: pid
  79. smooth_time: 2.5
  80. max_power: 1.0
  81. pid_Kp: 18.28
  82. pid_Ki: 1.28
  83. pid_Kd: 65.48
  84. min_temp: 0
  85. min_extrude_temp: 25
  86. max_temp: 280
  87.  
  88. [tmc2208 extruder]
  89. uart_pin: ar66
  90. microsteps: 4
  91. run_current: 0.8
  92. hold_current: 0.2
  93. stealthchop_threshold: 0
  94.  
  95. [verify_heater extruder]
  96. heating_gain: 2
  97. check_gain_time: 25
  98. hysteresis: 7.5
  99. max_error: 240
  100.  
  101. [heater_bed]
  102. heater_pin: ar8
  103. sensor_type: EPCOS 100K B57560G104F
  104. sensor_pin: analog14
  105. control: pid
  106. pid_Kp: 54.027
  107. pid_Ki: 0.770
  108. pid_Kd: 948.182
  109. min_temp: 0
  110. max_temp: 130
  111.  
  112. [fan]
  113. pin: ar9
  114. max_power: 1.0
  115. cycle_time: 0.05
  116. kick_start_time: 0.1
  117.  
  118. [mcu]
  119. serial: /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A907K8EE-if00-port0
  120. pin_map: arduino
  121. baud:250000
  122.  
  123. [printer]
  124. kinematics: cartesian
  125. max_z_velocity: 60
  126. max_z_accel: 2000
  127. max_velocity: 1000
  128. max_accel: 20000
  129. max_accel_to_decel: 20000
  130. square_corner_velocity: 20
  131.  
  132. [homing_override]
  133. set_position_z: 5
  134. gcode: G90
  135. set_velocity_limit velocity=600
  136. set_velocity_limit accel=4000
  137. set_velocity_limit accel_to_decel=2500
  138. set_velocity_limit square_corner_velocity=6
  139. G1 Z10 F2000
  140. G28
  141. axes: z
  142.  
  143. [virtual_sdcard]
  144. path: ~/.octoprint/uploads/
  145.  
  146. [force_move]
  147. enable_force_move: True
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!