API tools faq
paste
Advertisement
robathome

Ender config 9-Mar-2019

robathome
Mar 9th, 2019
404
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 2.63 KB | None | 0 0
raw download clone embed print report
  1. # Config file for Creality Ender-3
  2. # Rob Smith 9-Mar-2019
  3.  
  4. [stepper_x]
  5. step_pin: ar54
  6. dir_pin: ar55
  7. enable_pin: !ar38
  8. step_distance: 0.05
  9. endstop_pin: ^!ar3
  10. position_endstop: 0
  11. position_min: 0
  12. position_max: 220
  13. homing_speed: 50
  14. homing_retract_dist: 5
  15. second_homing_speed: 10
  16.  
  17. [tmc2208 stepper_x]
  18. uart_pin: ar63
  19. microsteps: 4
  20. interpolate: True
  21. run_current: 0.8
  22. hold_current: 0.3
  23. stealthchop_threshold: 800
  24.  
  25. [stepper_y]
  26. step_pin: ar60
  27. dir_pin: !ar61
  28. enable_pin: !ar56
  29. step_distance: .05
  30. endstop_pin: ^!ar15
  31. position_endstop: 200
  32. position_min: 0
  33. position_max: 200
  34. homing_speed: 50
  35. homing_retract_dist: 5
  36. second_homing_speed: 10
  37.  
  38. [tmc2208 stepper_y]
  39. uart_pin: ar40
  40. microsteps: 4
  41. run_current: 0.8
  42. hold_current: 0.3
  43. stealthchop_threshold: 800
  44.  
  45. [stepper_z]
  46. step_pin: ar46
  47. dir_pin: ar48
  48. enable_pin: !ar62
  49. step_distance: .01
  50. endstop_pin: ^!ar19
  51. position_endstop: 0.25
  52. position_min: -1
  53. position_max: 225
  54. homing_speed: 10
  55. homing_retract_dist: 3
  56. second_homing_speed: 3
  57.  
  58. [tmc2208 stepper_z]
  59. uart_pin: ar65
  60. microsteps: 4
  61. run_current: 0.8
  62. hold_current: 0.3
  63. stealthchop_threshold: 300
  64.  
  65. [extruder]
  66. step_pin: ar26
  67. dir_pin: !ar28
  68. enable_pin: !ar24
  69. step_distance: 0.041376
  70. nozzle_diameter: 0.3
  71. filament_diameter: 1.75
  72. max_extrude_cross_section: 10
  73. pressure_advance: 0.1
  74. pressure_advance_lookahead_time: 0.012
  75. heater_pin: ar10
  76. sensor_type: ATC Semitec 104GT-2
  77. sensor_pin: analog13
  78. control: pid
  79. smooth_time: 2.5
  80. max_power: 1.0
  81. # Stock PID gains:
  82. #pid_Kp: 21.527
  83. #pid_Ki: 1.10
  84. #pid_Kd: 108.982
  85. #pid_Kd: 45.64
  86. # Sarasota PID gains:
  87. pid_Kp: 18.28
  88. pid_Ki: 1.28
  89. pid_Kd: 65.48
  90. #Volcano gains (with GT2 thermistor)
  91. #pid_Kp: 18.947
  92. #pid_Ki: 1.640
  93. #pid_Kd: 54.709
  94. min_temp: 0
  95. min_extrude_temp: 25
  96. max_temp: 280
  97.  
  98. [tmc2208 extruder]
  99. uart_pin: ar66
  100. microsteps: 4
  101. run_current: 0.8
  102. hold_current: 0.2
  103. stealthchop_threshold: 0
  104.  
  105. [verify_heater extruder]
  106. heating_gain: 2
  107. check_gain_time: 25
  108. hysteresis: 7.5
  109. max_error: 240
  110.  
  111. [heater_bed]
  112. heater_pin: ar8
  113. sensor_type: EPCOS 100K B57560G104F
  114. sensor_pin: analog14
  115. control: pid
  116. pid_Kp: 54.027
  117. pid_Ki: 0.770
  118. pid_Kd: 948.182
  119. min_temp: 0
  120. max_temp: 130
  121.  
  122. [fan]
  123. pin: ar9
  124. max_power: 1.0
  125. cycle_time: 0.05
  126. kick_start_time: 0.1
  127.  
  128. [mcu]
  129. serial: /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A907K8EE-if00-port0
  130. pin_map: arduino
  131.  
  132. [printer]
  133. kinematics: cartesian
  134. max_z_velocity: 60
  135. max_z_accel: 2000
  136. max_velocity: 500
  137. max_accel: 4000
  138. max_accel_to_decel: 3000
  139. square_corner_velocity: 6
  140.  
  141. [homing_override]
  142. set_position_z: 5
  143. gcode: G90
  144. G1 Z10 F2000
  145. G28
  146. axes: z
  147.  
  148. [virtual_sdcard]
  149. path: ~/.octoprint/uploads/
  150.  
  151. [force_move]
  152. enable_force_move: True
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!