Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [stepper_x]
- step_pin: ar54
- dir_pin: ar55
- enable_pin: !ar38
- step_distance: .0125
- endstop_pin: ^!ar3
- position_endstop: 0
- position_max: 330
- homing_speed: 20
- [stepper_y]
- step_pin: ar60
- dir_pin: !ar61
- enable_pin: !ar56
- step_distance: .0125
- endstop_pin: ^!ar14
- position_endstop: 0
- position_max: 310
- homing_speed: 20
- [stepper_z]
- step_pin: ar46
- dir_pin: ar48
- enable_pin: !ar62
- step_distance: .0025
- endstop_pin: ^!ar18
- position_endstop: 0.0
- position_max: 400
- homing_speed: 5
- [extruder]
- step_pin: ar26
- dir_pin: ar28
- enable_pin: !ar24
- step_distance: .0111
- nozzle_diameter: 0.400
- filament_diameter: 1.750
- heater_pin: ar10
- sensor_type: EPCOS 100K B57560G104F
- sensor_pin: analog13
- control: pid
- pid_Kp: 22.2
- pid_Ki: 1.08
- pid_Kd: 114
- min_temp: 0
- max_temp: 275
- [heater_bed]
- heater_pin: ar8
- sensor_type: EPCOS 100K B57560G104F
- sensor_pin: analog14
- control: watermark
- min_temp: 0
- max_temp: 130
- [fan]
- pin: ar9
- kick_start_time: 0.0
- [mcu]
- serial: /dev/ttyACM0
- pin_map: arduino
- baud: 250000
- [printer]
- kinematics: corexy
- max_velocity: 300
- max_accel: 3000
- max_z_velocity: 20
- max_z_accel: 100
- [display]
- lcd_type: st7920
- cs_pin: ar16
- sclk_pin: ar23
- sid_pin: ar17
- encoder_pins: ^ar31, ^ar33
- click_pin: ^!ar35
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
